E 'possible to build a water ionizer in my apartment, but you need to know basis, before starting the project. The first thing you need to know is the quality of your tap. For this purpose, it is necessary to sample (several liters), your tap water and do laboratory testing certificate. After seeing the results, you know, is the dissolved oxygen (DO) and pH.
The purpose of water on water ionizeryou can fill your body with oxygen and neutralize acidic conditions in the body. If the tap water contains enough oxygen (dissolved oxygen) and alkaline already, has no sense of self-ionization device.
The intention to build a water ionizer that is obvious. You must be careful to get clean water, free from contamination, water-based, which can be found on your faucet. Using the ionizer's water, you get the benefits of ionized water, withoutpay or pay for too commercial.
The basic principle of how to build a water ionizer to the electrodes, positive and negative electrodes placed in water to a separate room. These electrodes are connected to 12V or 24V power source via alligator clips. Once the camera is activated, the process of ionization. The minerals soluble in water, or be attracted to the cathode and anode (electrode), so the water separates into acid andalkaline water. Alkaline water for drinking, while the acid water to sterilization of the waste or a disinfection process.
The common electrode is used in titanium, but you can always change to other metals, good conductors such as silver, aluminum and copper. Copper and aluminum are the most commonly used, many people and companies prefer to use. It is always best to first build a water ionizer to consult with experts in the IT industry, so as not to wasteMoney.
Comments :
แสดงความคิดเห็น